Product Description
2 Motor Metal Chassis
₹99.00 ₹75.00 "exc. GST"
Length : 127 mm
Width : 104 mm
Height : 48 mm
In stock
Email to a friend
Leave a reply
You must be logged in to post a comment.
Products
-
JQ6500 Audio Board
₹350.00 "exc. GST" -
20 Pcs 74HC595 IC
₹460.00 "exc. GST" -
BMES Biometric Board
₹1,999.00₹1,499.00 "exc. GST" -
6-0-6 Volt 500mA Transformer
₹55.00 "exc. GST" -
12-0-12 Volt 500mA Transformer
₹60.00 "exc. GST"
Related Products
Diameter : 67 mm
Width : 25 mm
Shaft Dimension : 5 x 4 mm Rectangular
Tread Type : Straight
L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
2 interface for 5V Servo connected to For Ardui-no's high-resolution dedicated timer - no jitter!
Can drive 4 DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional DC motors with individual 8-bit speed selection
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
Pull down resistors keep motors disabled during power-up
reset button
2 external terminal power interface, for seperate logic/motor supplies
Assembly Guide : https://www.youtube.com/watch?v=4A7tJ0QH4L4 Base: 37mm x 33mm x 3mm / 1.5" x 1.3" x 0.1" Mounting Hole Distances: 30mm x 26mm / 1.2" x 1" Standing Height (zero tilt): 67mm / 2.6" Top Platform: 38mm x 36mm / 1.5"x 1.4" Weight: 37g
₹80.00 "exc. GST"
Add to cart
Logical voltage : 5V
Drive voltage : 5V-35V
Logical current : 0mA-36mA
Drive current : 2A(MAX single bridge)
Storage temperature : -20 to +135 ºC
Max power : 25W
Weight : 30gms
Size : 43*43*27mm
Power Input : Vcc/Gnd (Voltage that is to be given to motors/output)
PCB Material : Glass Epoxy FR4
LED Indications : Power LED
Blog
₹120.00 "exc. GST"
Add to cart 
Weight: 55 g Dimension: 40.7 ×19.7 x 42.9 mm (L x W x H) Stall torque: 9.4 kg/cm (4.8 V) Gear: Metal Operating speed: 0.2 sec/60 degree(4.8 V) Operating voltage: 4.8 V to 5 V Temperature range: 0 to 55 deg Celsius Power Supply: Through 5V External DC adapter (USB not recommended) Wiring Description : Red Wire (Vcc or +5V), Black or Brown Wire (Gnd or 0V), Orange Wire (PWM Signal)
Reviews
There are no reviews yet.